[
  {
    "id": "benchy",
    "name": "i×2benchy",
    "category": "just4fun",
    "dateAdded": "2026-10-06",
    "gumroadUrl": "https://3dpix2studio.gumroad.com/l/benchy",
    "photos": [
      "images/benchy.webp",
      "images/benchy.webm"
    ],
    "gradient": "radial-gradient(circle at 38% 32%, #eef0ee, #b9bfba 55%, #8b928c)",
    "price": "free",
    "priceValue": 0,
    "desc": "<h2>Just Another Benchy, Kind Of</h2>\n\n<p>A small decorative boat modeled from scratch — inspired by the familiar Benchy shape, but not intended to be a replica or a calibration model.</p>\n\n<p>This is not a calibration tool. It won't tell you much about your printer's bridging or overhangs — at least not in the way the original Benchy does. But it's not completely useless as a test either: the arched openings in the cabin and the curved hull can still give you a sense of how your printer handles smooth surfaces and small interior details.</p>\n\n<p>Mostly though, it's just a boat. A small, somewhat characterful object that sits on your desk and quietly does its job.</p>",
    "weight": "11,37 g (PLA)",
    "dimensions": "57.6 × 30 × 44.6 mm",
    "printTime": "1h 51 m (with profile settings)",
    "printSettings": "layer: 0.08 mm, walls: 3, infill: 20%",
    "comingSoon": false
  },
  {
    "id": "aztec-coin",
    "name": "aztec coin",
    "category": "just4fun",
    "dateAdded": "2026-10-06",
    "gumroadUrl": "https://3dpix2studio.gumroad.com/l/aztecoin",
    "photos": [
      "images/azteccoin.webp",
      "images/aztec cursedgold coin.webm"
    ],
    "gradient": "radial-gradient(circle at 40% 30%, #f5f0ea, #e3c98f 55%, #ab8a4b)",
    "price": "free",
    "priceValue": 0,
    "desc": "<h2>Aztec Coin — Cursed Gold Treasure (fan-made)</h2>\n\n<p>A small fan-made reinterpretation of a cursed gold coin from a certain well-known pirate adventure movie.</p>\n\n<p>This is <strong>not a replica</strong>. The coin was modeled entirely from scratch as a just-for-fun project, inspired by the general idea and visual character of the original.</p>\n\n<p>The two halves represent distinct obverse and reverse sides. If you prefer a simpler result, you can also print two obverse sides and glue them together.</p>\n\n<p>Whether you turn it into a pendant, keep it as a little piece of treasure, or find your own use for it — that's up to you. <strong>Personal use only.</strong></p>",
    "weight": "8 g (PLA)",
    "dimensions": "54.2 × 54.2(58.6) × 6.2 mm",
    "printTime": "1h 4m",
    "printSettings": "layer: 0.08 mm, walls: 3, infill: 25%",
    "comingSoon": false
  },
  {
    "id": "gifty",
    "name": "gifty",
    "category": "functional-decor",
    "dateAdded": "2026-10-06",
    "gumroadUrl": "https://3dpix2studio.gumroad.com/l/gifty",
    "photos": [
      "images/gifty.webp",
      "images/Gifty.webm"
    ],
    "gradient": "radial-gradient(circle at 36% 34%, #f2ede0, #d8b25c 55%, #a9793a)",
    "price": "$5",
    "priceValue": 5,
    "desc": "<h2>Gifty — Printable Gift Box Container</h2>\n\n<p>Gifty is a decorative container shaped like a classic gift box with a ribbon on top.</p>\n\n<p>It works both as a printable gift package and as a reusable storage container for small items.</p>\n\n<p>Four sizes are included, from a tiny surprise box to a large functional container.</p>\n\n<p>Whether used to wrap a small gift, store something on your desk, or simply add a little more character to an everyday container, Gifty is meant to be as useful as it is decorative.</p>",
    "weight": "55 | 192 | 391 | 665 g",
    "dimensions": "61.2 × 61.2 × 78 | 102 × 102 × 130 | 143 × 143 × 180 | 180 × 180 × 228 mm",
    "printTime": "4h 31m | 8h 32m | 10h 48m | 17h 28m",
    "printSettings": "layer: 0.08—0.2 mm, walls: 3, infill: 10—20%",
    "comingSoon": false
  },
  {
    "id": "flow",
    "name": "flow",
    "category": "functional-decor",
    "dateAdded": "",
    "gumroadUrl": "#",
    "photos": [
      "images/flow.webp"
    ],
    "gradient": "radial-gradient(circle at 40% 32%, #eef0f4, #a3aecb 55%, #5f6d92)",
    "price": "",
    "priceValue": null,
    "desc": "<p>A compact functional decor object built around a minimal abstract geometric form. Depending on the version, works as a vase, desk organizer, container, phone stand, or planter for plants that don't need drainage. Includes large/small and tall/low variants with rounded or square openings; the small version includes an optional phone holder adapter.</p>",
    "weight": "",
    "dimensions": "",
    "printTime": "",
    "printSettings": "Most profiles use reduced acceleration, top-surface ironing enabled, and layer heights below 0.2mm for a smoother finish.",
    "comingSoon": true
  },
  {
    "id": "dendra",
    "name": "dendra",
    "category": "functional-decor",
    "dateAdded": "2026-10-06",
    "gumroadUrl": "https://3dpix2studio.gumroad.com/l/dendra",
    "photos": [
      "images/dendra.webp",
      "images/Dendra.webm"
    ],
    "gradient": "radial-gradient(circle at 35% 30%, #f2ede6, #c7b79a 55%, #8a7554)",
    "price": "$8",
    "priceValue": 8,
    "desc": "<h2>Dendra — Three-Tier Sculptural Stand</h2>\n\n<p>Dendra is a three-tier étagère built around a branching, tree-like central column.</p>\n\n<p>The sculptural structure connects three levels into a single piece, combining a functional tiered stand with a distinctive organic form.</p>\n\n<p>This is a redesign of my earlier Tiered Stand, with refined geometry aimed at improving both the overall appearance and structural reliability. The model is assembled from three printed parts into the complete stand.</p>\n\n<p>Use it as a display stand for small objects, a decorative organizer, or simply as a sculptural piece in its own right.</p>",
    "weight": "222.3 g (PLA)",
    "dimensions": "175 × 175 × 266 mm",
    "printTime": "7h 19m",
    "printSettings": "layer: 0.2 mm, walls: 3, infill: 20%",
    "comingSoon": false
  },
  {
    "id": "ionico",
    "name": "ionico",
    "category": "functional-decor",
    "dateAdded": "",
    "gumroadUrl": "#",
    "photos": [
      "images/ionico.webp"
    ],
    "gradient": "radial-gradient(circle at 36% 30%, #eeeef2, #b3aecb 55%, #6c6690)",
    "price": "",
    "priceValue": null,
    "desc": "<p>A display pedestal shaped like an Ionic column capital, with a hidden storage compartment. Available in S/M/L sizes with several configurations: standard storage, sealed planter, drainage planter, and a lamp-compatible version using the Bambu Lab lamp kit. The S size also works as a phone stand. Assembles from two main parts with locking pins.</p>",
    "weight": "",
    "dimensions": "",
    "printTime": "",
    "printSettings": "The lamp cover is designed to print in Translucent PLA for a diffused light effect; Basic PLA also works.",
    "comingSoon": true
  },
  {
    "id": "badge",
    "name": "i×2badge",
    "category": "just4fun",
    "dateAdded": "2026-10-15",
    "comingSoon": false,
    "gumroadUrl": "https://3dpix2studio.gumroad.com/l/badge",
    "photos": [
      "images/ix2badge1.webp",
      "images/ix2badge2.webp",
      "images/badge.webm"
    ],
    "gradient": "radial-gradient(circle at 36% 30%, #eeeef2, #b3aecb 55%, #6c6690)",
    "price": "free",
    "priceValue": 0,
    "desc": "<h2>i×2Badge — Customizable Clothing Badge</h2>\n<p>A badge with your own design — text, a logo, or a simple graphic — worn on clothing without a pin or metal fastening hardware.</p>\n<p>It consists of two printed parts: a front plate for your design and a matching holder. The holder sits behind the fabric; the plate presses into it from the front, clamping the fabric between them.</p>\n<p>Available in round and rounded-square shapes, three sizes (33, 42, and 50 mm), and four clearances (0.2, 0.3, 0.5, and 0.6 mm) to accommodate different fabrics. The clearance is marked on each holder (02, 03, 05, 06).</p>\n<p>The print profile makes it easy to add your own design to the front plate using an SVG file. For reliable printing, make sure the lines in your design are at least as thick as the line width set in the slicer.</p>",
    "weight": "5—8 g (PLA)",
    "dimensions": "35.8 × 35.8 × 5 | 45.4 × 45.4 × 5 | 53.4 × 53.4 × 5 | Ø 35.8 × 5 | Ø 45.4 × 5 | Ø 53.4 × 5 mm",
    "printTime": "30—60m",
    "printSettings": "layer: 0.2 mm, walls: 3"
  },
  {
    "id": "sixty",
    "name": "sixty",
    "category": "just4fun",
    "dateAdded": "2026-10-24",
    "comingSoon": false,
    "gumroadUrl": "https://3dpix2studio.gumroad.com/l/sixty",
    "photos": [
      "images/sixty0.webp",
      "images/sixty.webm",
      "images/sixty1.webp"
    ],
    "gradient": "radial-gradient(circle at 36% 30%, #eeeef2, #b3aecb 55%, #6c6690)",
    "price": "free",
    "priceValue": 0,
    "desc": "<h2>Sixty — Geometric Construction Set</h2>\n<p>A construction set for building a truncated icosahedron — a polyhedron with a remarkably sphere-like shape — and many other structures.</p>\n<p>It is based on identical node modules joined with small friction-fit pins. An additional edge extension piece allows larger structures while preserving the original geometry.</p>\n<p>A complete truncated icosahedron takes 60 node modules and 90 pins. The same parts can also become decorative objects, open-frame containers, small ornaments and pendants, or part of lamps and light fixtures.</p>",
    "weight": "from 70 g",
    "dimensions": "86.75 × 85.58 × 83.49 mm",
    "printTime": "from 10h",
    "printSettings": "layer: 0.08 mm, walls: 3, infill: 15%, elephant foot compensation: 0.2 mm, wall generator: arachne, "
  },
  {
    "id": "boompkin",
    "name": "boo-mpkin",
    "category": "just4fun",
    "dateAdded": "2026-10-24",
    "comingSoon": false,
    "gumroadUrl": "https://3dpix2studio.gumroad.com/l/boo-mpkin",
    "photos": [
      "images/boomkin0.webp",
      "images/boompkin.webm"
    ],
    "gradient": "radial-gradient(circle at 36% 30%, #eeeef2, #b3aecb 55%, #6c6690)",
    "price": "free",
    "priceValue": 0,
    "desc": "<h2>Boo-mpkin: Twist-Up Pumpkin with a Rising Ghost</h2>\n<p>Boo-mpkin is a Halloween pumpkin with a mechanical surprise inside. Twist the base and the lid rises with a partial turn, revealing a ghost hidden within.</p>\n<p>The mechanism is built from seven printed parts that fit snugly together and snap into place, with no screws, magnets or additional hardware. Assembly is a small puzzle in itself: only one orientation of the parts lines up the body, lid and base.</p>\n<p>An alternative lifting platform without the ghost peg is included, turning the pumpkin into a small box with a lid that rises on its own.</p>\n<p>Use it as a Halloween decoration, a surprise gift box, or a container for candy and other little treasures.</p>",
    "weight": "63 g (PLA)",
    "dimensions": "64 × 64 × 60 mm",
    "printTime": "8h 40m",
    "printSettings": "layer: 0.2 mm, walls: 3, infill: 20%"
  },
  {
    "id": "cordlings-hw",
    "name": "cordlings hw",
    "category": "just4fun",
    "dateAdded": "2026-11-16",
    "comingSoon": false,
    "gumroadUrl": "https://3dpix2studio.gumroad.com/l/cordlings-hw",
    "photos": [
      "images/cordlingsh1.webp",
      "images/cordlingsh2.webp",
      "images/cordlings.webm"
    ],
    "gradient": "radial-gradient(circle at 36% 30%, #eeeef2, #b3aecb 55%, #6c6690)",
    "price": "free",
    "priceValue": 0,
    "desc": "<h2>Cordlings — Halloween Drawstring Beads Set</h2>\n<p>A small set of Halloween beads for hoodie drawstrings: a pumpkin, a ghost, a skull and a bat. They are designed for round cords.</p>\n<p>Most of the models have a 6 mm hole for the cord by default. The pumpkin comes in three sizes (S, M and L, at 100%, 113% and 130%), with M and L also available with slightly enlarged holes. For thinner or thicker cords, you can scale the models a little in your slicer.</p>\n<p>The beads stay well on the cord without additional fastening. For extra security, there are two simple locking mechanisms: one is used in the pumpkin and the ghost, the other in the skull and the bat.</p>",
    "weight": "2.79—7.54 g",
    "dimensions": "bat: 42 × 23 × 12 mm, ghosty: 19 × 19 × 21 mm, skully: 18 × 16.5 × 14 mm, pumpkins: from 19 × 19 × 14 to 25 × 25 × 19 mm",
    "printTime": "from 40m to 1h 20m (one bead)",
    "printSettings": "layer: 0.08/0.12 mm, walls: 3, infill: 15%"
  },
  {
    "id": "lucerna",
    "name": "lucerna",
    "category": "functional-decor",
    "dateAdded": "2026-11-16",
    "comingSoon": false,
    "gumroadUrl": "https://3dpix2studio.gumroad.com/l/lucerna",
    "photos": [
      "images/lucerna1.webp",
      "images/lucerna2.webp",
      "images/lucerna.webm"
    ],
    "gradient": "radial-gradient(circle at 36% 30%, #eeeef2, #b3aecb 55%, #6c6690)",
    "price": "free",
    "priceValue": 0,
    "desc": "<h2>Lucerna</h2>\n<p>Lucerna is a modular decorative chain assembled from individually printed geometric links, with an additional connector sphere that opens up new ways to combine them.</p>\n<p>Originally inspired by a simple rhombic form, the geometry gradually evolved into something resembling a small lantern — which eventually gave the model its name.</p>\n<p>The set includes one-piece links (faster to print and easier to assemble), two-piece links (more patience to assemble, noticeably more flexible), a two-part threaded clasp for necklaces and bracelets, and a connector sphere for joining several chains in different directions.</p>",
    "weight": "single link: ~0.6 g, sphere: 4.45 g",
    "dimensions": "link: 12.8 × 12.8 × 24 mm, sphere: 28.6 × 29 × 26.7 mm",
    "printTime": "single link: ~12m, sphere: ~1h",
    "printSettings": "layer: 0.08 mm, walls: 2, infill: 15%"
  },
  {
    "id": "poise",
    "name": "poise",
    "category": "functional-decor",
    "dateAdded": "2026-11-16",
    "comingSoon": false,
    "gumroadUrl": "https://3dpix2studio.gumroad.com/l/poise",
    "photos": [
      "images/poise.webp",
      "images/poise1.webp",
      "images/poise.webm"
    ],
    "gradient": "radial-gradient(circle at 36% 30%, #eeeef2, #b3aecb 55%, #6c6690)",
    "price": "free",
    "priceValue": 0,
    "desc": "<h2>Poise</h2>\n<p>Poise is a simple, geometric, and slightly sculptural stand for your phone, photo frames, illustrations & etc.</p>\n<p>It is designed to hold a phone in landscape orientation. The geometry isn’t intended to support portrait orientation, so a phone placed vertically will tend to slide out of position.</p>\n<p>While designed with phones in mind, the model may also work as a stand for larger objects such as photo frames, illustrations, or even a tablet when scaled up. These use cases haven’t been tested, so results may vary — feel free to experiment.</p>",
    "weight": "9.8 g",
    "dimensions": "78.5 × 70.0 × 45.6 mm",
    "printTime": "1h 38m",
    "printSettings": "layer: 0.08 mm, walls: 2, infill: 15%"
  },
  {
    "id": "atom",
    "name": "atom",
    "category": "just4fun",
    "dateAdded": "2026-11-16",
    "comingSoon": false,
    "gumroadUrl": "https://3dpix2studio.gumroad.com/l/atom",
    "photos": [
      "images/atom.webp",
      "images/atom.webm",
      "images/atoms.webm"
    ],
    "gradient": "radial-gradient(circle at 36% 30%, #eeeef2, #b3aecb 55%, #6c6690)",
    "price": "free",
    "priceValue": 0,
    "desc": "<h2>Atom — Universal Voxel Cube</h2>\n<p>A universal cube for building: a physical voxel on a 13 mm grid. Each cube has three faces with pins and three faces with slots, so it connects to its neighbors from any of its six sides.</p>\n<p>Keep every cube in the same orientation as you build: pins on three faces, slots on the opposite three. Then pin always meets slot, and any shape you assemble will click together. Combine colors and build anything in a blocky voxel style.</p>\n<p>Building is layered: rows, layers, volume — the same logic a 3D printer uses to make an object. Atom is a toy, a creative tool and a small lesson in spatial thinking.</p>",
    "weight": "1.96 g (one brick)",
    "dimensions": "15 × 15 × 15 mm",
    "printTime": "24m (one brick)",
    "printSettings": "layer: 0.08 mm, walls: 3, infill: 15%"
  }
]